In this video I complete the build and mount it to a Fanatec Podium hub. I may make a bonus video later when I swap out the control board.

NOTE: For encoder control board installation, refer to this video: https://youtu.be/kunGMd6njXM

You can grab the 3d print files from here
https://www.thingiverse.com/thing:4734360
https://www.thingiverse.com/thing:4734346

Build Video Part1: https://youtu.be/7dnFuJReHjA
Build Video Part2: https://youtu.be/Ekb6oQj5QXM

Shopping list $153 - (+13 for the encoder version, +10 for carbon look, + 7 if you don't want to shorten your usb cable) I'm sure much of what's on there can be sourced cheaper and you may even have some of the things lying around.

Donor Wheel - $50 (via offer, also available from other sellers)
https://www.ebay.com/itm/325mm-Universal-Rally-Race-Flat-Drift-Black-Steering-Wheel-Sport-Suede-Leather/392637829090?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

Phone Tracfone LG Rebel 4 4G LTE - $20
https://www.amazon.com/gp/product/B084GXVNGR/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1

Filament - $23
https://www.amazon.com/gp/product/B00J0ECR5I/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

Short angled usb cable for the phone $9
https://www.amazon.com/gp/product/B07H172CHD/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

USB hub (listing says not for charging but yet it seems to do so for this phone, not all phones will work with it, confirmed not working with iphone 11) - $9
https://www.amazon.com/gp/product/B071JTSMVQ/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1

Coiled USB extension Cable - $7
https://www.amazon.com/gp/product/B00VULGQAQ/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1


Momentary on/off Buttons $7
https://www.ebay.com/itm/Momentary-ON-OFF-Push-Button-Switch-Waterproof-12mm-Black-M122-Mini-10pcs/162336250040?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

Arcade switches for use with shifters - $8
https://www.ebay.com/itm/Push-Button-Micro-Switch-arcade-replacement-10-piece/301502780140?hash=item4632f752ec:g:WyIAAOSw1ZBUw~dd

Rare Earth Neodymium Magnets - $10 https://www.ebay.com/itm/Super-Strong-N52-50-45-Rare-Earth-Neodymium-Magnet-Disc-for-Science-Fridge-DIY/293630703557?ssPageName=STRK%3AMEBIDX%3AIT&var=592447709865&_trksid=p2057872.m2749.l2649

Control board for use with encoders - $11
Pro Micro ATmega32U4 https://www.amazon.com/gp/product/B08CC24JRS/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Rotary Encoders - $12
https://www.ebay.com/itm/Super-Strong-N52-50-45-Rare-Earth-Neodymium-Magnet-Disc-for-Science-Fridge-DIY/293630703557?ssPageName=STRK%3AMEBIDX%3AIT&var=592447709865&_trksid=p2057872.m2749.l2649

Control board with no encoders - $10
Zero Delay USB Encoder
https://www.amazon.com/gp/product/B07WZLV4XM/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

Shorter USB Cable for the board - $7 (you don't need this you can also just shorten the cable)
https://www.amazon.com/gp/product/B082X1CGWG/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

Carbon Fiber Vinil Wrap - $10 (not needed but looks good)
https://www.amazon.com/gp/product/B00L9J4JRG/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1


Screws For Button box - $10 ish
3 x M5 55mm (10-24 can be substituted)
2 x M5 50mm (10-24 can be substituted)

Screws For Fanatec Hub
2 x M5 30mm (cant be substituted)
4 x M5 20mm under sync (cant be substituted)

Screws for Shifters
4 x M4 30mm
2 x m5 30mm
4 x M3 20mm (6-32 can be substituted)
2 x m3 25mm (6-32 can be substituted)