Ender 3 S1 , ender 3 v1 / v2 Sprite Extruder PRO (KIT) how to unlock 300° Celcius feature. |
|
CAUTION: USE AT OWN RISK!!! (i do not recommend printing on those temps)
This is on how to unlock the 300° celcius on the sprite extruder pro ... FW link: https://github.com/mriscoc/Ender3V2S1/releases/tag/20220527 disclaimer: please read before commenting on the video: The video shows the possibility of modifying the upper limit of the user entry menu item, but there are other limits that have to be taken into account. First the physical or manufacturing limit, a thermistor itself could be capable of metering higher temperatures but the wire's isolators or the heatbreak not, some manufacturers put PTFE as wire's isolators in his thermistors limiting the use to temperatures bellow of the degrading temperature of that material. Another important limit is the calibration table of Marlin (Marlin/src/module/thermistor) for the #1 type thermistor for example, the upper limit of the table is 300°C then for Marlin it is not possible to do metering at higher temperatures with that thermistor and an error will occur if that limit is reached. In the case of Volcano version, the thermistor type is #5, in that case, Marlin has a table limit of 713°C!! then this video could be useful to reach high temperatures if the correct heatblock/break is used. Source : Miguel Risco-Castillo |