DIY tutorial on how to make a wood hang frame with an engineer poster or basic print for under $5.

Supplies:
-Wood | I used cedar wood that is about $5 for an 6-8ft piece but you can get a 8ft furring strip for $1.15. Home Depot will cut the pieces for free!
-Print | In this video I used my own Floral Fox Print (available in my shop), if you wanted a large photo staples has engineer prints for $3.89. They come on very thin paper but mine have held up for a few years so far and they are huge!
-Foam Board | You can use old boxes or anything with thickness, I used a frame backing I found at a thrift store. You can also find foam board at the dollar store.
Rope | You can use twine or anything that you have laying around. I used clothes line from amazon.
Scissors
Drill
Screws | Sorry if I said nails in the video:)

Check out my blog post for links and photos of the engineer prints I have made and please subscribe for more tutorials!
https://www.thejoyco.net/blog/2019/2/22/how-to-make-a-wood-hang-frame

-Libby Joy
Wedding Stationer | DIYer | Watercolor Artist | and Puppy Lover |
thejoyco.net