Jeep Wrangler Rubicon 12v Kids Electric Ride On Car Assembly Instructions |
|
Here is our Jeep Wrangler Rubicon 12v Kids Electric Ride On Car Assembly Instructions.
____________________________________________ For more info on this car, visit http://bit.ly/JeepWranglerRubiconRideOn Check out our Jeep Wrangler Promo Video - https://youtu.be/rLGFssrT5pk Our ride on cars - https://riiroo.com/collections/ride-on-cars-and-jeeps Our ride on motorbikes - https://riiroo.com/collections/electric-motorbikes Our ride on scooters - https://riiroo.com/collections/riiroo-scooters ____________________________________________ Here are the instructions: 1. Take a look at the parts list and ensure you have all the items to build. 2. Please refer to the parts list in the manual. 3. Protect and place the car on a flat surface. 4. Insert the steering rod hook through the body of the car whilst lining up the hook on the steering rack. 5. Remove nut & bolt from the steering wheel. 6. Attach the gearing cog to the back of the wheel. 7. Line up the gearing cog with the motor. 8. For the rear wheels, ensure the assembly order of the hardware is as follows - wheel - washer - & finally the split pin. 9. For the rear wheels, ensure the assembly order of the hardware is as follows - washer - wheel - washer - & finally the split pin. 10. Attach the rear wheel trim to the relative gaps on the wheel. 11. Repeat the process on the other side. 12. For the front wheels, ensure the assembly order of the hardware is as follows - washer - wheel - washer - & finally the split pin. 13. Attach the front wheel trim to the relative gaps on the wheel. 14. Repeat the process on the other side. 15. Remove nut & bolt from the steering wheel. 16. Connect the steering wheel wire to the multiplug protruding from the steering console. 17. Ensure the wire is threaded back through the console once connected to prevent damage. 18. Ensure the steering wheel is lined up with the hole on the steering rod. 19. Secure the steering wheel with the nut & bolt that was previously removed. 20. Attach the backrest by pushing into place until you hear a click. 21. Connect the battery terminal multiplug. 22. Attach the wheel badge stickers to the centre of the wheel trim. 23. Repeat process for all 4 wheels. ► If you need help choosing a ride-on toy for a present, then check us out @ https://riiroo.com/ ►Subscribe: http://bit.ly/RiiRooSubscribe to see more videos on our ride-on toys. ►Find us on Facebook: https://www.facebook.com/riirooltd/ #JeepWranglerRubiconRideOn #JeepRideOn #JeepWranglerAssembly |