High speed and temp printing with voron trident |
|
By adding reflective panels and insulation I managed to get 75ºC chamber temperature, ideal for printing ASA, but any hotter and I get clogs.
At this temperature layer adhesion is far better. @Polymaker ASA filament being printed. Mods: light X beam 9mm belts xol1 toolhead sherpa mini extruder ldo2504AH motors BTT octopus pro with 5160pro drivers on 48v Print speed: 0.3mm layer height outer perimeters: 150mm/s inner perimeters: 200mm/s infill: 250mm/s Travels: 800mm/s 40,000 mm/s^2 travel and infill 10,000mm/s^2 perimeters |