Easy DIY USB Sequential Shifter for Sim Racing. This basic Sequential shifter is made by modding an existing arcade joystick. The design also has minimal fabrication, is neat, cheap and compact.

It is USB, stand alone and can be used in combination with any steering wheel combination - Logitech, G25, G27, G29, G920, Thrustmaster, Fanatec, or OSW.

The wires can be soldered to switchs, but shown as plug in to keep it easy for people without access to soldering irons.

The joystick from standard has little resistance, and needs to be modded to be functional as a sequential.
By relocating the standard plastic ring under the metal plate it increases some of the force to shift. The rubber O ring and carbon plate add more resistance. The carbon also finishes off the top nicely.

Lower spring could also be upgraded to a higher strength item.
Try different thickness O rings / rubber fuel hose, ect under the carbon plate to adjust resistance of lever to your liking.

ITEMS USED
Arcade Joystick adjustable 8,4,2 way https://ebay.us/VtUOjO
USB encoder https://ebay.us/qRXLuw
Carbon Fiber https://ebay.us/mLMS3n
M5 Bolts https://ebay.us/zDPgiX
Rubber O ring or hard rubber tube.
M10 bolt with taped thread - M6x1 internal
Gear knob
This site contains affiliate links for which I may be compensated

Gameplay
Assetto Corsa
Dirt Rally

Thank you for watching and being a part of the channel.
Your comments and questions are all welcome.

Please ask any question about the design, build or parts used.
Also share with others who might like to build this project.


Check here for other SIM HACKS AND MODS
https://www.youtube.com/channel/UCQS1ZB3BVSrBo3tCs7PyfxQ


This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
https://creativecommons.org/licenses/by-nc-nd/4.0/


Copyright
© AMSTUDIO All rights reserved | https://amstudioprojects.com