Today, let's get started with PrusaSlicer for Mac! It's easy to use with non-Prusa printers, and I'll show you how to set up a profile for the Ender 3 and Ender 3 Pro. But you can use this with any printer, and the profile setup instructions will work equally well for Windows or Linux users!

LINKS
PrusaSlicer
https://www.prusa3d.com/prusaslicer/

; START G-CODE

G91 ;use relative positioning
G0 Z5 ;move Z up 5mm prior to homing

G90 ;absolute positioning
M82 ;set extruder to absolute mode
M107 ;start with the fan off

G28 ;home all axes
G1 Z25 F5000 ;lift nozzle to leave room for filament ooze

M104 S[first_layer_temperature] ;set extruder temp
M140 S[first_layer_bed_temperature] ;set bed temp
M190 S[first_layer_bed_temperature] ;wait for bed temp
M109 S[first_layer_temperature] ;wait for extruder temp

G92 E0 ;set extruder to 0;
G28 X0 Y0 ;move X/Y to min end-stops
G28 Z0 ;move Z to min end-stops
G1 Z0.3 ;move Z up just a bit
G1 X3 Y3 F500.0 ;move X and Y to start of priming location
G1 X60.0 E9 F500.0 ;start prime line
G1 X100.0 E13 F500.0 ;finish prime line
G92 E0 ;zero the extruded length again


; END G-CODE
G4 ;wait until all previous commands are done
M221 S100 ;set flow rate to 100%
M104 S0 ;turn off nozzle heater
M140 S0 ;turn off bed heater
M107 ;turn off part cooling fan
G91 ;use relative positioning
G0 Z10 ;move Z up a bit
G90 ;use absolute positioning
G1 X0 Y220 ;home X axis, move bed forward to present the print
M84 ;turn off stepper motors


Did this video help you out, save you a bunch of time, or help you learn something new?
If so, please consider becoming a channel member, or buying me a coffee, or leaving a tip! Your support really helps, and is VERY MUCH APPRECIATED!
✅ BV3D Channel Membership: https://youtube.com/bv3dchannel/join
☕️ Buy Me a Coffee: https://www.buymeacoffee.com/5lKshEVvL
👍🏻 PayPal tip jar: https://www.paypal.me/bv3d

*️⃣ The BV3D Channel Storefront on Amazon:
• https://www.amazon.com/shop/bv3dbryanvines

*️⃣ Popular 3D printer affiliate links:
• BIQU: http://shrsl.com/3s4hr
• Creality: https://shrsl.com/3qu2u
• Comgrow: https://bit.ly/33xcDtB [Check out the Creality REFURBS!]
• Elegoo: http://shrsl.com/3pu98
• FLSun: https://flsun3d.com/?ref=ifo73zup-gb
• Pergear: https://bit.ly/BV3Dpergear
• Sovol: https://bit.ly/3h90d2L
• Sunlu: https://bit.ly/3hGNzpQ
• Voxelab: https://bit.ly/3vVG9Wq

*️⃣ In the market for a magnetic flexible build system for your 3D printer?
💥Wham Bam Systems flex plates: http://bit.ly/2YzogLZ
As a Wham Bam Systems Associate I earn from qualifying purchases.

*️⃣ Shop for just about anything:
🛒🇺🇲US: https://amzn.to/2x4hBxS [affiliate link]
🛒🇨🇦Canada: https://amzn.to/2Ycb5ju [affiliate link]
As an Amazon Associate I earn from qualifying purchases.

SOCIAL MEDIA
Follow me on Twitter (@bryan_vines): https://twitter.com/bryan_vines

Disclosure:
I sometimes receive compensation such as discounted or free products, and when applicable, this is disclosed in videos and their descriptions. Whether free, discounted, or paid full price, any reviewed product is tested to the best of my ability, and I give my honest impression. All opinions expressed are my own.

#PrusaSlicer
#3DPrinter
#3DPrintingFriends